ASTM A312/A312M Stainless steel pipe
ASTM A312/A312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes The specification ASTM A312/A312M covers seamless, straight-seam welded, and heavily c
ASTM A312/A312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes The specification ASTM A312/A312M covers seamless, straight-seam welded, and heavily c
ASTM A312/A312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
The specification ASTM A312/A312M covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.
Material furnished under this specification shall conform to the applicable requirements of Specification ASTM A999/A999M “Specification for General Requirements for Alloy and Stainless Steel Pipe” unless otherwise provided herein.
A312 Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | |||
UNS S20400 | UNS S20910 A312 TPXM-19 | UNS S21900 A312 TPXM-10 | UNS S21904 A312 TPXM-11 |
UNS S24000 A312 TPXM-29 | UNS S20100 A312 TP201 | UNS S20153 A312 TP201LN | UNS S30400 A312 TP304 |
UNS S30403 A312 TP304L | UNS S30409 A312 TP304H | UNS S30415
| UNS S30451 A312 TP304N |
UNS S30453 A312 TP304LN | UNS S30600 | UNS S30615 | UNS S30815 |
UNS S30908 A312 TP309S | UNS S30909 A312 TP309H | UNS S30940 A312 TP309Cb | UNS S30941 A312 TP300HCb |
UNS S31002 | UNS S31008 A312 TP310S | UNS S31009 A312 TP310H | UNS S31035 |
UNS S31040 A312 TP310Cb | UNS S31041 A312 TP310HCb | UNS S31050
| UNS S31254 |
UNS S31272 | UNS S31600 A312 TP316 | UNS S31603 A312 TP316L | UNS S31609 A312 TP316H |
UNS S31635 A312 TP316Ti | UNS S31651 A312 TP316N | UNS S31653 A312 TP316LN | UNS S31700 A312 TP317 |
UNS S31703 A312 TP317L | UNS S31725 | UNS S31726 | UNS S31727 |
UNS S32053 | UNS S32100 A312 TP321 | UNS S32109 A312 TP321H | UNS S32615 |
UNS S32654 | UNS S33228 | UNS S34565 | UNS S34700 A312 TP347 |
UNS S34709 A312 TP347H | UNS S34751 A312 TP347LN | UNS S34800 A312 TP348 | UNS S34809 A312 TP348H |
UNS S35045 | UNS S35315 | UNS S38100 A312 TPXM-15 | UNS S38815
|
UNS N08020 A312 Alloy 20 | UNS N08367 | UNS N08800 A312 800 | UNS N08810 A312 800H |
UNS N08811 | UNS N08904 | UNS N08925
| UNS N08926 |
Other Editions of ASTM A312/A312M:
* Committee A01 has identified the location of selected changes to this specification since the last issue, A312/A312M – 18, that may impact the use of this specification. (Approved Nov. 1, 2018)
(1) Deleted grain size requirement for UNS S31035 in Table 5.
* Committee A01 has identified the location of selected changes to this specification since the last issue, A312/A312M – 17, that may impact the use of this specification. (Approved Sept. 1, 2018)
(1) Revised Table X1.1 to be consistent with ASME B36.19.